PDF Catalog
BVA thermo Aluminium Sealed cover, insulated
LOAD CAPACITY:
125 kN test load EN 124.
MATERIAL:
Frame and cover sections in extruded aluminium. Stainless steel screws. Insulated version, consisting of: Z-brackets, EPDM seal, polyurethane rigid foam insulation panel coated with aluminium on both sides.
Thermal resistance = 3.60 m2 K/W,
Thermal coefficient 0.27 W/m2K
FEATURES:
Sealed access cover in high-quality finish with inlaid insulation panel. Very attractive surface, the visible edges are particularly attractive. Therefore these covers are particularly suitable where a look of elegance is required. Very easy- to-open design. Robust corner joints guarantee a very high degree of rigidity and make it easier to lay tiles and ceramic finishes. EPDM seal. The cover is reinforced with a clamped steel mesh reinforcement.
THE LIFT-OFF OPENING SYSTEM:
Every HAGODECK Type BVA thermo alu cover comes with a set of lifting keys and clear installation instructions.
The HAGO advantage: jammed covers are released by simply turning the Golden Key.
APPLICATIONS:
Inside buildings where it is important to obtain a nice visual effect and where a cover with insulation properties is required. Also, in places where floor finishes may need polishing after fixing or where particular attention needs to be given to corrosion resistance.
INSTALLATION:
Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring and to fill the cover with water-tight concrete.
types & dimensions
| Type | Clear S/O* dimensions of shaft (≈ cm) | Outside dimensions (≈ cm) | Weight approx. | S/O* |
|---|---|---|---|---|
| c x d | A x B | |||
| BVA thermo 22 | 20 x 20 | 32 x 32 | 3 kg | O |
| BVA thermo 33 | 30 x 30 | 42 x 42 | 5 kg | O |
| BVA thermo 44 | 40 x 40 | 52 x 52 | 8 kg | O |
| BVA thermo 45 | 45 x 45 | 57 x 57 | 9 kg | S |
| BVA thermo 55 | 50 x 50 | 62 x 62 | 10 kg | S |
| BVA thermo 64 | 60 x 40 | 72 x 52 | 10 kg | S |
| BVA thermo 66 | 60 x 60 | 72 x 72 | 12 kg | S |
| BVA thermo 635 | 63,5 x 63,5 | 75,5 x 75,5 | 12 kg | O |
| BVA thermo 77 | 70 x 70 | 82 x 82 | 14 kg | O |
| BVA thermo 86 | 80 x 60 | 92 x 72 | 14 kg | S |
| BVA thermo 88 | 80 x 80 | 92 x 92 | 17 kg | S |
| BVA thermo 106 | 100 x 60 | 112 x 72 | 17 kg | S |
| BVA thermo 108 | 100 x 80 | 112 x 92 | 21 kg | S |
| BVA thermo 110 | 100 x 100 | 112 x 112 | 26 kg | S |
Installation depth: ≈ 6.6 cm
Installation height ≈ 7.6 cm
Insulation panel penetrates ≈ 7.9 cm into the shaft
Special sizes possible
*S = article available from stock
*O = to order
Section drawing
- 1 / Frame
- 2 / Cover
- 3 / Seal
- 4 / Reinfocement
- 5 / Allen screw (stainless steel)
- 6 / Die-cast corner (alu)
- 7 / Plastic cap
- 8 / Base plate
- 9 / Injection-moulded part (plastic)
- 10 / Square nut (stainless steel)
- 11 / Insulation plate in Z-bracket
- 12 / Lifting handle for insulation plate
- 13 / Alu Z-bracket
Specification clause
HAGODECK Type BVA thermo (aluminium)
Access cover with Golden Key Lift Off opening tool, Type HAGODECK BVA thermo , clear opening ....... x ....... cm, suitable for infilling with the architect’s choice of floor finish. Aluminium, Insulated version with insulation panel , thermal resistance min. 3,60 m² K/W, sealed, 125 kN (EN 124), unobtrusive corner joints (max. visible surface 30 x 30 mm). Stainless steel screws. Installation shall be according to the manufacturer’s instructions. Manufacturer: HAGO A-4600 Wels, Austria
www.hago.at