PDF Catalog
BV-GD-F90 steel, BVE-GD-F90 stainless steel fire-resistant access cover, hinged, with gas-strut lift
Load capacity:
125 kN test load EN 124
Material:
Frame and cover made of 2 mm cold- formed precision steel profiles, hot-dip galvanised. Or in grade 304 stainless steel, passivated. High- specification gas strut(s). Fire protection panel, EPDM seal and fire-resistant seal.
Features:
Comfort-lift access cover. Smell proof. Opening tools included. Opening is assisted by the gas strut(s) to such an extent that the BV-GD-F90/ BVE-GD-F90 cover can be opened and closed by one person. Safety device (hold open arm) fitted to prevent the open cover from closing.
Fire test certificate:
The Austrian test certificate issued by the Institute for Fire Protection Technology and Safety Research (IBS)
confirms that HAGODECK Type BV-F90 steel galv. and BVE-GD-F90 stainless steel resists a fire for 120 minutes and thus
significantly contributes to safety in the event
of a fire.
In accordance with EN 13501-2, Type BV-GD-F90 and BVE-GD-F90 is classified in fire resistance class REI 120 (a↔b).
Applications:
Access covers inside buildings that are required to be fire-resistant and that need to be opened frequently, without particular effort.
Installation:
Please study the enclosed installation instructions carefully before installation and pay attention to our specifications. Care must be taken to seal the outer frame into the surrounding flooring.
Important note:
The gas strut(s) are not installed for transport-related reasons. These should be installed after the cover and frame have been installed and filled (concrete must be set), in the open position in accordance with our installation instructions.
types & dimensions
Steel
| Type | Clear S/O* dimensions of shaft (≈ cm) | Outside dimensions (≈ cm) | Weight approx. | S/O* |
|---|---|---|---|---|
| c x d | A x B | |||
| BV-GD-F90 66 | 60 x 60 | 73,5 x 75,15 | 34 kg | S |
| BV-GD-F90 86 | 80 x 60 | 93,5 x 75,15 | 42 kg | S |
| BV-GD-F90 88 | 80 x 80 | 93,5 x 95,15 | 50 kg | S |
| BV-GD-F90 106 | 100 x 60 | 113,5 x 75,15 | 49 kg | O |
| BV-GD-F90 110 | 100 x 100 | 113,5 x115,15 | 66 kg | S |
Stainless steel
| Type | Clear S/O* dimensions of shaft (≈ cm) | Outside dimensions (≈ cm) | Weight approx. | S/O* |
|---|---|---|---|---|
| c x d | A x B | |||
| BVE-GD-F90 66 | 60 x 60 | 73,5 x 75,15 | 34 kg | B |
| BVE-GD-F90 86 | 80 x 60 | 93,5 x 75,15 | 42 kg | B |
| BVE-GD-F90 88 | 80 x 80 | 93,5 x 95,15 | 50 kg | B |
| BVE-GD-F90 106 | 100 x 60 | 113,5 x 75,15 | 49 kg | B |
| BVE-GD-F90 110 | 100 x 100 | 113,5 x115,15 | 66 kg | B |
Cover depth ≈ 5.0 cm
Installation depth: ≈ 7.5 cm
Total height = 21.7 cm
Special sizes possible
*S = article available from stock
*O = article is manufactured on request
Section drawing
- 1 / Frame
- 2 / Cover
- 3 / Seal
- 4 / Reinforcement
- 5 / Allen screw
- 6 / Plastic cap
- 7 / Anchor
- 8 / Hinge
- 9 / Gas strut
- 10 / Safety device
- 11 / Fire protection plate
- 12 / Stainless steel Z-bracket
- 13 / Lifting handle for fire protection plate
Specification clause
HAGODECK Type BV-GD-F90 (galvanised steel)
Access cover with Golden Key Lift Off opening tool, Type HAGODECK BV-GD-F90, clear opening ....... x ....... cm, suitable for infilling with the architect’s choice of floor finish. Fire-resistant version classified in accordance with EN 13502-2: REI 120 (a↔b) (with classification report), with flush-to-floor hinge and gas strut(s) for assisted opening, hot dip galvanised steel, smell proof, 125 kN (EN 124), unobtrusive corner joints (max. visible surface 35 x 35 mm). Installation shall be according to the manufacturer’s instructions.
Manufacturer: HAGO A-4600 Wels, Austria www.hago.at
HAGODECK Type BVE-GD-F90 (stainless steel)
Access cover with Golden Key Lift Off opening tool, Type HAGODECK BVE-GD-F90, clear opening ....... x ....... cm, suitable for infilling with the architect’s choice of floor finish. Fire-resistant version classified in accordance with EN 13502-2: REI 120 (a↔b) (with classification report), with flush-to-floor hinge and gas strut(s) for assisted opening, stainless steel, smell proof, 125 kN (EN 124), unobtrusive corner joints (max. visible surface 35 x 35 mm). Installation shall be according to the manufacturer’s instructions.
Manufacturer: HAGO A-4600 Wels, Austria www.hago.at